CT5-V Finally: CT5-V Blackwing Reproduction Spoilers

[Terrance Speed]

There have only been a few raw spoilers shipped to date. Just recently got some shots of Chad's gloss black unit installed. Through the process of his install I have learned the spoilers can grow in size when absorbing primer. With everything finally on the car I have to say it looks pretty killer.

 

[Terrance Speed]

Got hands on a limited number of those GM plastic inserts for the outside studs on the spoiler. I have not included these in the past since attaining them is difficult, and dont want to hold up parts due to GM's constraints. I will be including these with future shipments while supplies last.

 

[WildCPA]

(Sold)

I recently received my spoiler from Terrance.
However, before I installed it, I received a call on a 2024 Z06 I couldn’t pass up.
My loss is somebody’s gain.
It’s still in the box, so you can see Terrance’s pictures.
I am in the Houston, Texas area so anybody local that was planning on purchasing one. I oked it with Terrance, you can save shipping costs as well as a few bucks if you want to come get it. I purchased the PPF covered spoiler.

 

[Terrance Speed]

(Sold)

I recently received my spoiler from Terrance.
However, before I installed it, I received a call on a 2024 Z06 I couldn’t pass up.
My loss is somebody’s gain.
It’s still in the box, so you can see Terrance’s pictures.
I am in the Houston, Texas area so anybody local that was planning on purchasing one. I oked it with Terrance, you can save shipping costs as well as a few bucks if you want to come get it. I purchased the PPF covered spoiler.

EXCELLENT deal. Congrats on the Z06 too man!

 

[Terrance Speed]

Quick production update. Targeting shipping all the remaining spoiler orders around Thanksgiving. Trying to get ahead of holidays and vacations.

Cheers!

 

[V Series]

Hi Guys,

I bought @WildCPA Spoiler due to time constraints and have another on order that is For Sale, Please see

For Sale - CT5 BW Carbon Fiber Rear Spoiler - Exhibitions Of Speed Version

I purchased an extra EOS rear spoiler that I do not need. It has been on order since 9/28 and is expected to be available to ship very soon (end of month). Terrance at EOS agreed to have it shipped directly within the lower 48. I am looking to get what I paid for it $1,575.00 shipped to your...

www.cadillacvnet.com

Thanks,
- Benny

 

[Neveready]

I am in the process of installing the spoiler and found this to be super helpful. To the OP and @Likuid ...strong writeup.

 

[Tall Steve]

I am in the process of installing the spoiler and found this to be super helpful. To the OP...strong writeup.

Rudy Rudy Rudy Rudy!

 

[Terrance Speed]

Still getting after it! Freshly built spoilers getting installed.

 

[Terrance Speed]

Five more spoilers going out this week. We are down to seven orders left to fulfill, and anticipating mid January for them. This makes a 100 spoiler milestone!

Hope you all have a good holiday, and get those orders in if you are ready.

 

[NickB]

Five more spoilers going out this week. We are down to seven orders left to fulfill, and anticipating mid January for them. This makes a 100 spoiler milestone!

Hope you all have a good holiday, and get those orders in if you are ready.

I just put in my order on NYE! Wondering if you still have the GM plastic retainers that will go out with future (and my) order?

Thanks in advance!

 

[FISH22]

Installed yesterday. Fitment is great and the quality of the weave is comparable to high end carbon fiber. Step drill bit used to create 15mm outboard holes to use the GM retainers. Also widened the holes next to those with a dremel to enable the spoiler to drop down smoothly.

I had to apply some heat and pressure to the ends of the spoiler after bolting it down, as the tape didn’t catch the trunk surface. With enough pressure, the tape made contact. The thicker tape really helps with this.

My 2 cents on install. You could honestly get away with not drilling and using maybe only a couple of the studs/nuts, if you replace the foam with 3M tape. My last eBay spoiler (great fitment, crappy weave) was held on purely with 3M tape. The stuff is strong, and I’ve used this methodology on my previous M cars and spoilers. Of course I prefer the OEM-like install with the hardware and retainers, but I’m sure there are people out there that would prefer not to drill. There are options.

Btw, I have a few extra sets of retainers. Will likely sell those to anyone interested.

 

[Terrance Speed]

I just put in my order on NYE! Wondering if you still have the GM plastic retainers that will go out with future (and my) order?

Thanks in advance!

I might be out by then. GM did not fulfill my entire order, so I only had enough for about 8 spoilers.

Installed yesterday. Fitment is great and the quality of the weave is comparable to high end carbon fiber. Step drill bit used to create 15mm outboard holes to use the GM retainers. Also widened the holes next to those with a dremel to enable the spoiler to drop down smoothly.

I had to apply some heat and pressure to the ends of the spoiler after bolting it down, as the tape didn’t catch the trunk surface. With enough pressure, the tape made contact. The thicker tape really helps with this.

My 2 cents on install. You could honestly get away with not drilling and using maybe only a couple of the studs/nuts, if you replace the foam with 3M tape. My last eBay spoiler (great fitment, crappy weave) was held on purely with 3M tape. The stuff is strong, and I’ve used this methodology on my previous M cars and spoilers. Of course I prefer the OEM-like install with the hardware and retainers, but I’m sure there are people out there that would prefer not to drill. There are options.

Btw, I have a few extra sets of retainers. Will likely sell those to anyone interested. View attachment 23410View attachment 23411View attachment 23412

Looks FANTASTIC brother!

 

[Ghostnotes]

Installed yesterday. Fitment is great and the quality of the weave is comparable to high end carbon fiber. Step drill bit used to create 15mm outboard holes to use the GM retainers. Also widened the holes next to those with a dremel to enable the spoiler to drop down smoothly.

I had to apply some heat and pressure to the ends of the spoiler after bolting it down, as the tape didn’t catch the trunk surface. With enough pressure, the tape made contact. The thicker tape really helps with this.

My 2 cents on install. You could honestly get away with not drilling and using maybe only a couple of the studs/nuts, if you replace the foam with 3M tape. My last eBay spoiler (great fitment, crappy weave) was held on purely with 3M tape. The stuff is strong, and I’ve used this methodology on my previous M cars and spoilers. Of course I prefer the OEM-like install with the hardware and retainers, but I’m sure there are people out there that would prefer not to drill. There are options.

Btw, I have a few extra sets of retainers. Will likely sell those to anyone interested. View attachment 23410View attachment 23411View attachment 23412

Is there a part number for these, just to keep an eye on.

 

[Likuid]

Is there a part number for these, just to keep an eye on.

CT5-V - Finally: CT5-V Blackwing Reproduction Spoilers

This is really easy. Thanks, I plan on doing it next weekend.

www.cadillacvnet.com

 

[Terrance Speed]

Three more spoilers set to ship this week!

 

[sps4runner]

Received a package from UPS today! Thanks Terrance.
Just waiting on the splitter.

 

[Yo Nadz]

What’s the current lead time on spoilers?

 

[Terrance Speed]

Received a package from UPS today! Thanks Terrance.
Just waiting on the splitter.

Heck yeah! working on those as we speak.

What’s the current lead time on spoilers?

I am about to start layup on the next batch. Probably 7-8 weeks.

 

[Terrance Speed]

More Exhibitions of Speed goodness from our friends in Canada.
.
I was just told that the OEM rear spoiler is now discontinued from GM? Can anyone confirm