Custom Blackwing Logo

[burn813]

Looks like it's mostly custom orders unless a vehicle/badge is really popular enough for them to stock popular designs. Everyone here has bought one-off badges.

This

 

[burn813]

call them and give this info as a reference:

 

[Kimkeys99]

call them and give this info as a reference: View attachment 8376

Thank you!!

 

[Mikezulu18]

I went to their website but I do not see the badge in their gallery to order it.

You would have to fill out an order form and send in the design so you don't have to pay for them designing from scratch. Myself and burns both have it since I sent it to him. Is a little leg work but you customize it how you want as long as you use the design I had them build.

 

[Mikezulu18]

call them and give this info as a reference: View attachment 8376

Ahhhh beat me to it good on you.

 

[Carguyshu]

Considering replacing the trunk CT5 with a BW logo and/or putting some on the sides. Right now the side V badges and CT5 are off.

I could put the rear badge like in the pic or I could mount a smaller BW emblem on a license plate frame. I’m planning on getting a vanity plate that says “B wing” so was considering a custom frame that says blackwing on it possibly with the logo kind of like the “RS” emblem logo one I got for my RS6

As far as the sides I’m looking at 3 options
1- factory location of V for the 5 (my car is a 5)

2- where fender badges usually are put like on hellcats

3- bottom of door like the 4

The emblem would be black in middle with chrome around and be actual emblems like what’s been shown previously, not a decal. I printed off black in middle with white around on paper so it’d show up easier/better in pics. I have the monochrome Cadillac logo emblems on trunk and grill already. Might also paint the yellows in the V badge in the back black and/or red. Red might be fine there rather than making all the checkered squares black since I have red calipers
What do you guys (gals?) think? These emblems are 6” wide by 1.5” tall.

 

[dribs15]

Considering replacing the trunk CT5 with a BW logo and/or putting some on the sides. Right now the side V badges and CT5 are off.

I could put the rear badge like in the pic or I could mount a smaller BW emblem on a license plate frame. I’m planning on getting a vanity plate that says “B wing” so was considering a custom frame that says blackwing on it possibly with the logo kind of like the “RS” emblem logo one I got for my RS6 View attachment 10501

View attachment 10497

As far as the sides I’m looking at 3 options
1- factory location of V for the 5 (my car is a 5)
View attachment 10498

2- where fender badges usually are put like on hellcats

View attachment 10502

3- bottom of door like the 4

View attachment 10499

The emblem would be black in middle with chrome around and be actual emblems like what’s been shown previously, not a decal. I printed off black in middle with white around on paper so it’d show up easier/better in pics. I have the monochrome Cadillac logo emblems on trunk and grill already. Might also paint the yellows in the V badge in the back black and/or red. Red might be fine there rather than making all the checkered squares black since I have red calipers
What do you guys (gals?) think? These emblems are 6” wide by 1.5” tall.

I'd like to see what the rear on license plate instead looks like and I like option 3 on side view

 

[rdollie]

I prefer option 4, put it in that odd blank area next to the c-pillar.

 

[Carguyshu]

I prefer option 4, put it in that odd blank area next to the c-pillar.

Not a bad idea. Here’s option 4 on my dads car which still has the V on the fender too

 

[rdollie]

Interesting...I've got a mock-up decal there on mine but it's pure black (trying options - one side is matte black, other has a carbon fiber pattern) and not particularly visible. The idea of using color for the outline is interesting and I'm thinking about the prior message mentioning maybe a red outline vs. the white on your Father's car (not quite sure how to pull that off with a Cricut quite yet though.)

I also spoke to a CNC mill about mocking up something for me in actual carbon fiber and one in titanium (need to pick this one back up as I never saw a response to my most recent email to them.)

 

[Carguyshu]

Interesting...I've got a mock-up decal there on mine but it's pure black (trying options - one side is matte black, other has a carbon fiber pattern) and not particularly visible. The idea of using color for the outline is interesting and I'm thinking about the prior message mentioning maybe a red outline vs. the white on your Father's car (not quite sure how to pull that off with a Cricut quite yet though.)

I also spoke to a CNC mill about mocking up something for me in actual carbon fiber and one in titanium (need to pick this one back up as I never saw a response to my most recent email to them.)

maybe also reach out to Yoast Fabrication: Premium Show Car Products & Welding Positioners

 

[rdollie]

maybe also reach out to Yoast Fabrication: Premium Show Car Products & Welding Positioners

AWESOME!! So much cheaper than the shop I've been working with (it's a few hundred just for the machine setup for EACH different design/material choice.) I'll ping Yoast later today.

Thx